Recent Projects.

Real jobs, our own machines. Here's what our gear has been up to around Perth lately โ€” and for each job, the exact package that did it, priced and ready to book. We post every job as it happens on Instagram.

Follow @tniplanthire

Soakwell installation โ€” in a gap you couldn't get a bobcat into.

1.7T Yanmar ViO17-1 ยท standard buckets ยท tight side access

1.5 cubes of sand out of the strip between a shed and the boundary fence. Most Perth councils want stormwater dealt with on your own block, so if you've put up a shed, a patio or a new driveway, this job is coming for you eventually โ€” and doing it with a shovel is a full weekend and a sore back.

This is the job zero tail swing was made for: the machine's back end never swings past its tracks, so it works hard up against the fence without touching the neighbour's colorbond, and the ViO17-1 retracts to 950mm to get in there in the first place. Dig, set the soakwells, run the pipe, backfill โ€” done with the standard buckets that come free with every mini excavator hire.

See more jobs on Instagram
The Soakwell Package 1.7T ViO17-1 excavator + 2.7T Apex trailer (FREE on 7-day hire) + all three buckets (free)
$90 /day* $630 total for a 7-day hire, ex GST โ€” towed on your car licence

Book This Package

Deck preparation โ€” 30+ footings bored with the auger.

1.7T Yanmar ViO17-1 ยท Digga PDX2 auger drive ยท siteworks + footings

Two jobs in one hire. First the siteworks: strip the old surface, clear the rubble and level the pad with the machine and buckets. Then the bit that would have broken a post-hole shovel โ€” over 30 footing holes for the deck posts, bored with the Digga PDX2 auger drive.

The auger does in seconds what takes long minutes by hand in Perth sand, and every hole comes out straight and to a consistent depth, so the posts line up and the subframe goes down level first go. Swap between bucket and auger on the same machine, on the same day, in the same hire.

See more jobs on Instagram
The Deck & Footings Package 1.7T ViO17-1 excavator + 2.7T Apex trailer (FREE on 7-day hire) + PDX2 auger drive incl. 1 bit + buckets (free)
$140 /day* $980 total for a 7-day hire, ex GST โ€” extra bit sizes $20/day each

Book This Package

Limestone retaining wall โ€” 250kg blocks, placed not pushed.

1.7T Yanmar ViO17-1 ยท limestone block lifter (SWL 300kg)

A commercial wall job in front of a busy row of shops โ€” a lot of blocks, and at around 250kg each they were never getting moved by hand. The block lifter bolts onto the machine, picks each block cleanly, swings it over and sets it down on the course โ€” level, first go, no shuffle-and-swear โ€” while the machine works out of a single parking bay.

Rated to 300kg SWL, adjustable to your block size, and it fits down access that a crane truck can't reach. It's the cheapest attachment we hire and the one people thank us for โ€” walls go up faster and backs stay intact.

See more jobs on Instagram
The Limestone Wall Package 1.7T ViO17-1 excavator + 2.7T Apex trailer (FREE on 7-day hire) + limestone block lifter + buckets (free)
$105 /day* $735 total for a 7-day hire, ex GST โ€” towed on your car licence

Book This Package

*Package prices are per day at the 7-day+ hire rate, ex GST, with the trailer free on 7+ day excavator hires. Shorter hires are welcome at our standard daily rates โ€” or build your own combination with the quote calculator on the rates page.

Your job could be next

Follow the jobs as they happen on Instagram, or tell us what you're planning and we'll put the right package together.

Follow @tniplanthire  Request a Quote