Excavator Attachment Hire Perth.

Browse our attachments.

Hire attachments with the excavator, or on their own if you're already running a compatible machine. Three bucket sizes (300mm, 450mm and 900mm) come free with every excavator hire. Not sure what your job needs? Call us — we use this gear ourselves. See all hire rates.

PDX2 Auger Drive Unit.

Digga — built for micro excavators, 750kg to 2T

A compact, high-torque Digga gearbox with a slimline body so you get more digging depth without extensions. Australian-made by Digga with a Danfoss Bell motor, backed by a 5-year gearbox warranty. Pairs with our tungsten auger bits for fence posts, footings, and tree planting in Perth's earth, clay and cap rock.

Max torque	2,336 Nm @ 240 bar
Flow range	30 – 50 L/min
Weight / length	45 kg · 557 mm
Body diameter	187 mm
Max auger size	600 mm
Output shaft	65 mm
Suits machines	750 kg – 2 T

From $50 /day* incl. 1 auger bit · *7-day rate, ex GST

Book Now

Tungsten Auger Bits — 150, 250 & 300mm.

Digga A4 series — tungsten teeth for tough Perth ground

Genuine Digga A4-series auger bits with tungsten teeth and knock-in/knock-out Padloc tooth system. Tungsten handles Perth's compacted sand, clay and limestone cap rock far better than standard earth teeth. Three sizes available: 150mm, 250mm and 300mm.

Diameters	150 mm · 250 mm · 300 mm
Teeth	Tungsten, double-cut boring head
Ground types	Earth, clay and rocky ground
Suits machines	750 kg – 5 T

From $20 /day each* *7-day rate, ex GST

Book Now

Limestone Block Lifter.

Dig-It LBG with chain — made for Perth limestone walls

Take the back-break out of limestone retaining work. The Dig-It block lifter (also called a block grab) hangs off the excavator with the included chain and D-shackles, and adjusts to grip standard Perth limestone blocks — place blocks precisely without a second pair of hands.

Rated SWL	300 kg
Grab weight	15 kg
Max block size	1 m × 350 mm × 350 mm
Adjustable widths	350 / 300 / 250 / 200 mm

From $15 /day* *7-day rate, ex GST

Book Now

Rock Breaker.

Force Hammer RS 200 series — for when the bucket says no

A hydraulic hammer sized for compact excavators from 1.2 to 3 tonnes. It's a perfect match for our 1.7T ViO17-1. Breaks limestone cap rock, old concrete slabs and footings. Runs off the excavator's auxiliary hydraulics.

Suits carriers	1.2 – 3.0 T excavators
Weight	140 kg
Length	1,300 mm
Impact rate	700 – 1,200 blows/min
Oil flow / pressure	20 – 40 L/min · 100 – 150 bar
Chisel diameter	45 mm

From $95 /day* *7-day rate, ex GST

Book Now

Ripper.

Single-tine ripper — loosen it before you dig it

When Perth's compacted sand, clay or cap rock is too hard for the bucket, rip it first. The single-tine ripper concentrates the excavator's full breakout force into one point, tearing through compacted ground, roots and soft rock so your bucket work flies. Pins straight onto our 1.7T ViO17-1.

Type	Single-tine ripper
Suits	Compact excavators (fits our 1.7T ViO17-1)
Best for	Compacted ground, clay, roots & cap rock

From $8 /day* *7-day rate, ex GST

Book Now